How to Clean Drone Filters with FilterKlear Black Series

Quick answer

The FilterKlear Black Series is a safe, no-liquid tool for removing dust and smudges from drone camera filters. Use it in a few simple steps to keep your filters clean without risking scratches or residue.

Step-by-step cleaning process

1. 1. Brush off loose dust: Extend the retractable brush on the FilterKlear Black Series and gently sweep it across the filter surface to remove loose dust and grit. Work from the center outward. Common mistake: pressing too hard can scratch the filter coating. Use light, even strokes.
2. 2. Apply the cleaning element: Twist the cap to expose the non-liquid cleaning tip. Lightly dab the tip onto the filter—do not rub. The cleaning element absorbs oils and smudges without spreading them. Checkpoint: if the tip looks dirty, rotate the cap to expose a fresh section before continuing.
3. 3. Inspect and repeat if needed: Hold the filter up to a light source. If smudges remain, repeat step 2 with a clean area of the tip. For stubborn spots, breathe a small amount of moisture onto the filter first, then clean again. Common mistake: using the same spot on the tip twice can redeposit oils. Always rotate to a clean area.
4. 4. Store the cleaner properly: After cleaning, retract the brush and close the cap. Store the FilterKlear Black Series in a dry, cool place. The cleaning element will not dry out, so it is ready for your next flight. Checkpoint: keep the cap closed when not in use to prevent dust from collecting on the tip.

Product facts

• FilterKlear™ Black Series: FilterKlear is specifically designed to clean digital camera filters with a natural brush that removes dust. Comes with a handy retractable dust removal brush and a special non-liquid cleaning element, designed to never dry out. This means you can clean your drone filters without carrying liquids or worrying about the cleaner drying out between flights.